Aseptomag产品包括: |
|
Aseptic valves(无菌阀) |
Sampling valves(取样阀) |
Hygienic valves(卫生阀) |
Valves Access (附件) |
Fittings(其他) |
|
Open feedback unit |
|
|
|
Open feedback units are the most common standard and
also the easiest way for the detection of most of the GEA
Aseptomag valve types. One or two (depending on valve
stroke and amount of proximitiy switches) stainless steel
brackets can be attached with screws to the pneumatic
actuator. The proximity switches are be mounted by using
the slot which is available in two different dimensions, once
for M8 and once for M12 (standard) proximity switches. The
power cables for this type of feedback is directly connected
with the cabinet |
|
T.VIS feedback system |
|
|
T.VIS feedback system reduces the amount of wiring on a
valve cluster. The centrally installed feedback unit enables
the visualization of the valve positions using inductive
proximity switches and flashing indicator on top of the
control module. The integrated solenoid valves control the
pneumatic actuator. All these components are installed
together with either a plug connection or bus-capable PC
board and can be connected to a PLC control system. |
|
Steam barrier - Type DS |
|
|
The?steam barrier DS is a valve accesory which enables an
enhanced bellow monitoring and therefore increases your
product safety. The increased valve housing?with two
integrated connection ports allows the admission of the
internal area behind the welded stainless steel bellow with
steam or other sterile media. Temperature probes give
continuous feedback to the PLC and recognize a bellow
damage within a short time. The system is
primarily designed for equipping new?installations |
|
Leakage monitor - Type LW |
|
|
The leakage monitor system LW is a valve accesory which
enables an enhanced bellow monitoring and therefore
increases your product safety. The additional flange with
two connection ports allows the admission of the internal
area behind the welded stainless steel bellow with steam
or other sterile media. Temperature probes give continuous
feedback to the PLC and recognize a bellow damage within
a short time. The system is primarily used for the retrofitting
of existing installations |
|
Stroke limiter - Type HB |
|
|
The stroke limiter enables the continuous, individual setting
of the?valve stroke by using the included bolt as a stopper
for the actuator piston.?The only restriction is the fact that
the required valve stroke?must?be?smaller than the
maximum valve stroke. |
|
Adjusting drive - Type SA |
|
|
The adjusting drive enables?the individual setting of an
additional valve stroke. Compared to the stroke limiter the
adusting drive still allows the actuation of the full stroke of
the valve. The adjusting drive enables, as it were, the
funcionality of a pneumatic actuator with seat lifting function,
but the seat lifting stroke can be set by the user individually. |
|
|
|